MPC8640D datasheet(11/140 Pages) FREESCALE

11 / 140 page

MPC8640 and MPC8640D Integrated Host Processor Hardware Specifications, Rev. 1

Freescale Semiconductor

Electrical Characteristics

2.2

Power Up/Down Sequence

The MPC8640 requires its power rails to be applied in a specific sequence in order to ensure proper device

operation.

NOTE

The recommended maximum ramp up time for power supplies is 20

milliseconds.

The chronological order of power up is:

1. All power rails other than DDR I/O (Dn_GVDD, and Dn_MVREF).

NOTE

There is no required order sequence between the individual rails for this

item (# 1). However, VDD_PLAT, AVDD_PLAT rails must reach 90% of

their recommended value before the rail for Dn_GVDD, and Dn_MVREF (in

next step) reaches 10% of their recommended value. AVDD type supplies

must be delayed with respect to their source supplies by the RC time

constant of the PLL filter circuit described in Section 20.2.1, “PLL Power

Supply Filtering”.

2. Dn_GVDD, Dn_MVREF

NOTE

It is possible to leave the related power supply (Dn_GVDD, Dn_MVREF)

turned off at reset for a DDR port that will not be used. Note that these

power supplies can only be powered up again at reset for functionality to

occur on the DDR port.

3. SYSCLK

The recommended order of power down is as follows:

1. Dn_GVDD, Dn_MVREF

2. All power rails other than DDR I/O (Dn_GVDD, Dn_MVREF).

NOTE

SYSCLK may be powered down simultaneous to either of item # 1 or # 2 in

the power down sequence. Beyond this, the power supplies may power

down simultaneously if the preservation of DDRn memory is not a concern.

See Figure 3 for more details on the Power and Reset Sequencing details

MPC8640D Arkusz danych(PDF) 11 Page - Freescale Semiconductor, Inc