| Zakładka z wyszukiwarką danych komponentów |
|
STM32L152C6 Arkusz danych(PDF) 83 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32L152C6 Arkusz danych(HTML) 83 Page - STMicroelectronics |
|
83 / 131 page ![]() DocID17659 Rev 9 83/131 STM32L151x6/8/B, STM32L152x6/8/B Electrical characteristics 105 Output driving current The GPIOs (general purpose input/outputs) can sink or source up to ±8 mA, and sink or source up to ±20 mA (with the non-standard VOL/VOH specifications given in Table 43. In the user application, the number of I/O pins which can drive current must be limited to respect the absolute maximum rating specified in Section 6.2: • The sum of the currents sourced by all the I/Os on VDD, plus the maximum Run consumption of the MCU sourced on VDD, cannot exceed the absolute maximum rating IVDDΣ (see Table 11). • The sum of the currents sunk by all the I/Os on VSS plus the maximum Run consumption of the MCU sunk on VSS cannot exceed the absolute maximum rating IVSSΣ (see Table 11). Output voltage levels Unless otherwise specified, the parameters given in Table 43 are derived from tests performed under ambient temperature and VDD supply voltage conditions summarized in Table 13. All I/Os are CMOS and TTL compliant. Table 43. Output voltage characteristics Symbol Parameter Conditions Min Max Unit VOL(1)(2) Output low level voltage for an I/O pin IIO = +8 mA 2.7 V < VDD < 3.6 V -0.4 V VOH(3)(2) Output high level voltage for an I/O pin 2.4 - VOL (1)(4) Output low level voltage for an I/O pin IIO =+ 4 mA 1.65 V < VDD < 2.7 V -0.45 VOH (3)(4) Output high level voltage for an I/O pin VDD-0.45 - VOL(1)(4) Output low level voltage for an I/O pin IIO = +20 mA 2.7 V < VDD < 3.6 V -1.3 VOH(3)(4) Output high level voltage for an I/O pin VDD-1.3 - 1. The IIO current sunk by the device must always respect the absolute maximum rating specified in Table 11 and the sum of IIO (I/O ports and control pins) must not exceed IVSS. 2. Tested in production. 3. The IIO current sourced by the device must always respect the absolute maximum rating specified in Table 11 and the sum of IIO (I/O ports and control pins) must not exceed IVDD. 4. Based on characterization data, not tested in production. |
|
Link URL |
| Czy Alldatasheet okazała się pomocna? [ DONATE ] |
O Alldatasheet | Reklama | Kontakt | Polityka prywatności | Link do karty katalogowej | Linki | Lista producentów All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |