LPC2292 datasheet(1/40 Pages) PHILIPS

Numer części	LPC2292

Szczegółowy opis	16/32-bit ARM microcontrollers 256 kB ISP/IAP Flash with CAN, 10-bit ADC and external memory interface

PDF	40 Pages

Scroll/Zoom	100%

Producent	PHILIPS [NXP Semiconductors]

Strona internetowa	http://www.nxp.com

Logo

1 / 40 page

LPC2292/LPC2294

16/32-bit ARM microcontrollers; 256 kB ISP/IAP Flash with

CAN, 10-bit ADC and external memory interface

Rev. 01 — 05 February 2004

Preliminary data

1.

General description

The LPC2292/LPC2294 are based on a 16/32 bit ARM7TDMI-S™ CPU with real-time

emulation and embedded trace support, together with 256 kilobytes (kB) of embedded

high speed ﬂash memory. A 128-bit wide memory interface and a unique accelerator

architecture enable 32-bit code execution at maximum clock rate. For critical code size

applications, the alternative 16-bit Thumb Mode reduces code by more than 30% with

minimal performance penalty.

With their 144 pin package, low power consumption, various 32-bit timers, 8-channel

10-bit ADC, 2/4 (LP2292/LPC2294) advanced CAN channels, PWM channels and up

to 9 external interrupt pins these microcontrollers are particularly suitable for

automotive and industrial control applications as well as medical systems and

fault-tolerant maintenance buses. Number of available GPIOs ranges from 76 (with

external memory) through 112 (single-chip). With a wide range of additional serial

communications interfaces, they are also suited for communication gateways and

protocol converters as well as many other general-purpose applications.

2.

Features

2.1 Key features

s 16/32-bit ARM7TDMI-S microcontroller in a LQFP144 package.

s 16 kB on-chip Static RAM and 256 kB on-chip Flash Program Memory. 128-bit

wide interface/accelerator enables high speed 60 MHz operation.

s In-System Programming (ISP) and In-Application Programming (IAP) via on-chip

boot-loader software. Flash programming takes 1 ms per 512 byte line. Single

sector or full chip erase takes 400 ms.

s EmbeddedICE-RT and Embedded Trace interfaces offer real-time debugging with

the on-chip RealMonitor software as well as high speed real-time tracing of

instruction execution.

s Two/four (LPC2292/2294) interconnected CAN interfaces with advanced

acceptance ﬁlters. Additional serial interfaces include two UARTs (16C550), Fast

I2C (400 kbits/s) and two SPIs™.

s Eight channel 10-bit A/D converter with conversion time as low as 2.44

µs.

s Two 32-bit timers (with 4 capture and 4 compare channels), PWM unit (6 outputs),

Real Time Clock and Watchdog.

s Vectored Interrupt Controller with conﬁgurable priorities and vector addresses.

s Conﬁgurable external memory interface with up to four banks, each up to 16 Mb

and 8/16/32 bit data width.

s Up to 112 general purpose I/O pins (5 V tolerant). Up to 9 edge/level sensitive

external interrupt pins available.

Podobny numer części - LPC2292

Producent	Numer części	Arkusz danych	Szczegółowy opis
NXP Semiconductors	LPC2292	273Kb / 54P	16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external memory interface Rev. 06-10 December 2007
	LPC2292	279Kb / 53P	16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external memory interface Rev. 7-4 December 2008
	LPC2292FBD144	273Kb / 54P	16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external memory interface Rev. 06-10 December 2007
	LPC2292FBD144	279Kb / 53P	16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external memory interface Rev. 7-4 December 2008
	LPC2292FBD144/00	273Kb / 54P	16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external memory interface Rev. 06-10 December 2007

More results

Podobny opis - LPC2292

Producent	Numer części	Arkusz danych	Szczegółowy opis
NXP Semiconductors	LPC2194	158Kb / 33P	Single-chip 16/32-bit microcontrollers 256 kB ISP/IAP Flash with 10-bit ADC and CAN Rev. 01-06 February 2004
	LPC2119	163Kb / 34P	Single-chip 16/32-bit microcontrollers; 128/256 kB ISP/IAP Flash with 10-bit ADC and CAN Rev. 03-22 December 2004
	LPC2212	185Kb / 40P	16/32-bit ARM microcontrollers; 128/256 kB ISP/IAP Flash with 10-bit ADC and external memory interface Rev. 02-23 December 2004
	LPC2292	273Kb / 54P	16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external memory interface Rev. 06-10 December 2007
	LPC2212	196Kb / 45P	16/32-bit ARM microcontrollers; 128/256 kB ISP/IAP flash with 10-bit ADC and external memory interface Rev. 04-3 January 2008
	LPC2292	279Kb / 53P	16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external memory interface Rev. 7-4 December 2008
	LPC2212	208Kb / 45P	16/32-bit ARM microcontrollers; 128/256 kB ISP/IAP flash with 10-bit ADC and external memory interface Rev. 04-3 January 2008
	LPC2212	359Kb / 47P	Single-chip 16/32-bit ARM microcontrollers; 128/256 kB ISP/IAP flash with 10-bit ADC Rev. 5-14 June 2011
	LPC2212	359Kb / 47P	Single-chip 16/32-bit ARM microcontrollers; 128/256 kB ISP/IAP flash with 10-bit ADC and external memory interface Rev. 5-14 June 2011
	LPC2292	456Kb / 54P	16/32-bit ARM microcontrollers; 256 kB ISP/IAP flash with CAN, 10-bit ADC and external memory interface Rev. 8-8 June 2011

More results

LPC2292 Arkusz danych(PDF) 1 Page - NXP Semiconductors

LPC2292 Arkusz danych(HTML) 1 Page - NXP Semiconductors

Podobny numer części - LPC2292

Podobny opis - LPC2292

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Arkusz danych Pobierz

Link URL