CS8406-CS datasheet(24/43 Pages) CIRRUS

24 / 43 page

CS8406

DS580F1

8.2

Control 2 (02h)

MMT - Select AES3 transmitter mono or stereo operation

Default = ‘0’

0 - Normal stereo operation

1 - Output either left or right channel inputs into consecutive subframe outputs (mono

mode, left or right is determined by MMTLR bit)

MMTCS - Select A or B channel status data to transmit in mono mode

Default = ‘0’

0 - Use channel A CS data for the A subframe and use channel B CS data for the B subframe

1 - Use the same CS data for both the A and B subframe outputs. If MMTLR = 0, use the

left channel CS data. If MMTLR = 1, use the right channel CS data.

MMTLR - Channel Selection for AES Transmitter mono mode

Default = ‘0’

0 - Use left channel input data for consecutive subframe outputs

1- Use right channel input data for consecutive subframe outputs

8.3

Data Flow Control (03h)

The Data Flow Control register configures the flow of audio data. The output data should be muted prior to changing

bits in this register to avoid transients.

TXOFF - AES3 Transmitter Output Driver Control

Default = ‘0

0 - AES3 transmitter output pin drivers normal operation

1 - AES3 transmitter output pin drivers drive to 0 V.

AESBP - AES3 bypass mode selection

Default = ‘0’

0 - Normal operation

1 - Connect the AES3 transmitter driver input directly to the RXP pin, which becomes a normal TTL

threshold digital input.

43210

MMT

MMTCS

MMTLR

43210

TXOFF

AESBP

00000

CS8406-CS Arkusz danych(PDF) 24 Page - Cirrus Logic