HT82K95AE datasheet(31/43 Pages) HOLTEK

31 / 43 page

CPL [m]

Complement Data Memory

Description

Each bit of the specified Data Memory is logically complemented (1

¢s complement). Bits

which previously contained a 1 are changed to 0 and vice versa.

Operation

[m]

¬ [m]

Affected flag(s)

CPLA [m]

Complement Data Memory with result in ACC

Description

Each bit of the specified Data Memory is logically complemented (1

¢s complement). Bits

which previously contained a 1 are changed to 0 and vice versa. The complemented result

is stored in the Accumulator and the contents of the Data Memory remain unchanged.

Operation

ACC

¬ [m]

Affected flag(s)

DAA [m]

Decimal-Adjust ACC for addition with result in Data Memory

Description

Convert the contents of the Accumulator value to a BCD ( Binary Coded Decimal) value re-

sulting from the previous addition of two BCD variables. If the low nibble is greater than 9 or

if AC flag is set, then a value of 6 will be added to the low nibble. Otherwise the low nibble

remains unchanged. If the high nibble is greater than 9 or if the C flag is set, then a value of

6 will be added to the high nibble. Essentially, the decimal conversion is performed by add-

ing 00H, 06H, 60H or 66H depending on the Accumulator and flag conditions. Only the C

flag may be affected by this instruction which indicates that if the original BCD sum is

greater than 100, it allows multiple precision decimal addition.

Operation

[m]

¬ ACC + 00H or

[m]

¬ ACC + 06H or

[m]

¬ ACC + 60H or

[m]

¬ ACC + 66H

Affected flag(s)

DEC [m]

Decrement Data Memory

Description

Data in the specified Data Memory is decremented by 1.

Operation

[m]

¬ [m] - 1

Affected flag(s)

DECA [m]

Decrement Data Memory with result in ACC

Description

Data in the specified Data Memory is decremented by 1. The result is stored in the Accu-

mulator. The contents of the Data Memory remain unchanged.

Operation

ACC

¬ [m] - 1

Affected flag(s)

HALT

Enter power down mode

Description

This instruction stops the program execution and turns off the system clock. The contents

of the Data Memory and registers are retained. The WDT and prescaler are cleared. The

power down flag PDF is set and the WDT time-out flag TO is cleared.

Operation

¬ 0

PDF

¬ 1

Affected flag(s)

TO, PDF

HT82K95EE/HT82K95AE

Rev. 1.50

April 13, 2012

HT82K95AE Arkusz danych(PDF) 31 Page - Holtek Semiconductor Inc

HT82K95AE Arkusz danych(HTML) 31 Page - Holtek Semiconductor Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43

Arkusz danych Pobierz

Link URL