AS3722 datasheet(82/199 Pages) AMSOSRAM

82 / 199 page

ams Datasheet

Page 81

[v1-01] 2015-Sep-07

Document Feedback

AS3722 − Detailed Descriptions- System Functions

I2C Write Access

Byte Write and Page Write formats are used to write data to the

slave.

Figure 75:

I2C Page Write

I2C Byte Write: Shows the format of an I2C byte write access.

Figure 76:

I2C Page Write

I2C Page Write: Shows the format of an I2C page write access.

The transmission begins with the START condition, which is

generated by the master when the bus is in IDLE state (the bus

is free). The device-write address is followed by the word

address. After the word address any number of data bytes can

be sent to the slave. The word address is incremented internally,

in order to write subsequent data bytes on subsequent address

locations.

For reading data from the slave device, the master has to change

the transfer direction. This can be done either with a repeated

START condition followed by the device-read address, or simply

with a new transmission START followed by the device-read

address, when the bus is in IDLE state. The device-read address

is always followed by the 1st register byte transmitted from the

slave. In Read Mode any number of subsequent register bytes

can be read from the slave. The word address is incremented

internally.

I2C Read Access

Random, Sequential and Current Address Read are used to read

data from the slave.

A data

WA++

A data 1 A data 2 A

...

data n

WA++

AS3722 Arkusz danych(PDF) 82 Page - ams-OSRAM AG