AX88796ALF datasheet(45/68 Pages) ASIX

45 / 68 page

AX88796ALF

3-in-1 Local Bus Fast Ethernet Controller

5.2.4 MR4 – Autonegotiation Advertisement Registers Bit Descriptions

FIELD

TYPE

DESCRIPTION

4.15 (NEXT_PAGE)

R/W

Next Page. Setting this bit to a 1 activates the next page function. This will

allow the exchange of additional data. Data is carried by optional next pages

of information.

4.14 (ACK)

R/W

Acknowledge. This bit is the acknowledge bit from the link code word.

4.13 (REM_FAULT)

R/W

Remote Fault. When set to 1, the PHY indicates to the link partner a remote

fault condition.

4.12:10 (PAUSE)

R/W

Pause. When set to a 1, it indicates that the PHY wishes to exchange flow

control information with its link partner.

4.9 (100BASET4)

R/W

100Base-T4. This bit should always be set to 0.

4.8 (100BASET_FD)

R/W

100Base-TX Full Duplex. If written to 1, autonegotiation will advertise that

the PHY is capable of 100Base-TX full-duplex operation.

4.7 (100BASETX)

R/W

100Base-TX. If written to 1, autonegotiation will advertise that the PHY is

capable of 100Base-TX operation.

4.6 (10BASET_FD)

R/W

10Base-T Full Duplex. If written to 1, autonegotiation will advertise that the

PHY is capable of 10Base-T full-duplex operation.

4.5 (10BASET)

R/W

10Base-T. If written to 1, autonegotiation will advertise that the PHY is

capable of 10Base-T operation.

4.4:0 (SELECT)

R/W

Selector Field. Reset with the value 00001 for IEEE 802.3.

5.2.5 MR5 – Autonegotiation Link Partner Ability (Base Page) Register Bit

Descriptions

FIELD

TYPE

DESCRIPTION

5.15

(LP_NEXT_PAGE)

Link Partner Next Page. When this bit is set to 1, it indicates that the link

partner wishes to engage in next page exchange.

5.14 (LP_ACK)

Link Partner Acknowledge. When this bit is set to 1, it indicates that the

link partner has successfully received at least three consecutive and

consistent FLP bursts.

5.13

(LP_REM_FAULT)

Remote Fault. When this bit is set to 1, it indicates that the link partner has a

fault.

5.12:5

(LP_TECH_ABILITY)

Technology Ability Field. This field contains the technology ability of the

link partner. These bits are similar to the bits defined for the MR4 register

(see Table 16).

5.4:0 (LP_SELECT)

Selector Field. This field contains the type of message sent by the link

partner. For IEEE 802.3 compliant link partners, this field should read

00001.

AX88796ALF Arkusz danych(PDF) 45 Page - ASIX Electronics Corporation

AX88796ALF Arkusz danych(HTML) 45 Page - ASIX Electronics Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68

Arkusz danych Pobierz

Link URL