ATmega325P datasheet(31/364 Pages) ATMEL

31 / 364 page

8023F–AVR–07/09

ATmega325P/3250P

8.4

Crystal Oscillator

XTAL1 and XTAL2 are input and output, respectively, of an inverting amplifier which can be con-

figured for use as an On-chip Oscillator, as shown in Figure 8-2. Either a quartz crystal or a

ceramic resonator may be used.

C1 and C2 should always be equal for both crystals and resonators. The optimal value of the

capacitors depends on the crystal or resonator in use, the amount of stray capacitance, and the

electromagnetic noise of the environment. Some initial guidelines for choosing capacitors for

use with crystals are given in Table 8-3. For ceramic resonators, the capacitor values given by

the manufacturer should be used.

Figure 8-2.

Crystal Oscillator Connections

The Oscillator can operate in three different modes, each optimized for a specific frequency

range. The operating mode is selected by the fuses CKSEL3..1 as shown in Table 8-3.

Note:

1. This option should not be used with crystals, only with ceramic resonators.

The CKSEL0 Fuse together with the SUT1..0 Fuses select the start-up times as shown in Table

8-4.

Table 8-3.

Crystal Oscillator Operating Modes

CKSEL3..1

Frequency Range

(MHz)

Recommended Range for Capacitors C1 and

C2 for Use with Crystals (pF)

100(1)

0.4 - 0.9

–

101

0.9 - 3.0

12 - 22

110

3.0 - 8.0

12 - 22

111

8.0 -

12 - 22

Table 8-4.

Start-up Times for the Crystal Oscillator Clock Selection

CKSEL0

SUT1..0

Start-up Time from

Power-down and

Power-save

Additional Delay from

Reset

CC = 5.0V)

Recommended Usage

000

258 CK(1)

14CK + 4.1 ms

Ceramic resonator, fast

rising power

001

258 CK(1)

14CK + 65 ms

Ceramic resonator,

slowly rising power

010

1K CK(2)

14CK

Ceramic resonator,

BOD enabled

XTAL2

XTAL1

GND

ATmega325P Arkusz danych(PDF) 31 Page - ATMEL Corporation

ATmega325P Arkusz danych(HTML) 31 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Arkusz danych Pobierz

Link URL